-
Warthox inspired 400mm quad project
First I used LibreCAD to create a frame design. Inspired by Warthox but smaller. Then I printed it on copper clad board using an inkjet so I would have an accurate pattern to follow. I drilled all the rounded corners then cut the rest with a cut off wheel. I can’t easily express how much…
-
Arduino USB Linker
https://github.com/c—/ArduinoUSBLinker
-
Easily build simonk firmware on Windows
This project is to make changing the simonk ESC firmware settings a little easier if you’re using Windows. This assumes you have downloaded the simonk firmware and have a directory with all the files in it. First download this zip and extract the two files inside in to your simonk directory. Now edit the “tgy.asm”…
-
MultiWii 3D
https://github.com/c—/MultiWii3D MultiWii simonk reverse motor test (for inverted flight) This is my technique for making 3D props: First I get two pieces of wood and a C-clamp. Then I heat up one side of the prop with a heat gun set on low. It actually doesn’t take that much heat. I keep the gun about…