Tag: lunarflow

  • Warthox inspired 400mm quad project

    Warthox inspired 400mm quad project

    First I used LibreCAD to create a frame design. Inspired by Warthox but smaller. Then I printed it on copper clad board using an inkjet so I would have an accurate pattern to follow. I drilled all the rounded corners then cut the rest with a cut off wheel. I can’t easily express how much…

  • Arduino USB Linker

    https://github.com/c—/ArduinoUSBLinker

  • Easily build simonk firmware on Windows

    This project is to make changing the simonk ESC firmware settings a little easier if you’re using Windows.  This assumes you have downloaded the simonk firmware and have a directory with all the files in it. First download this zip and extract the two files inside in to your simonk directory. Now edit the “tgy.asm”…

  • MultiWii 3D

    https://github.com/c—/MultiWii3D MultiWii simonk reverse motor test (for inverted flight) This is my technique for making 3D props: First I get two pieces of wood and a C-clamp.  Then I heat up one side of the prop with a heat gun set on low.  It actually doesn’t take that much heat.  I keep the gun about…