Tag: multiwii

  • FemtoWii


    This is a small 25mm by 30mm MultiWii board I started designing a while ago. I haven’t had much time to refine or test it. I did create a prototype board but that’s about it. The intent was to create a board small enough to be used on micro quads, helicopters, and planes. I’m providing […]

  • MultiWiiCL


    https://github.com/c—/MultiWiiCL This is a command line text based tool for configuring MultiWii. It also provides a full scripting environment for whatever fancy future use. I needed this because MultiWiiConf wouldn’t run at all on my old laptop and on my newer laptop it was really slow and too fat. I also wanted a way to […]

  • Warthox inspired 400mm quad project

    Warthox inspired 400mm quad project

    First I used LibreCAD to create a frame design. Inspired by Warthox but smaller. Then I printed it on copper clad board using an inkjet so I would have an accurate pattern to follow. I drilled all the rounded corners then cut the rest with a cut off wheel. I can’t easily express how much […]

  • Easily build simonk firmware on Windows

    This project is to make changing the simonk ESC firmware settings a little easier if you’re using Windows.  This assumes you have downloaded the simonk firmware and have a directory with all the files in it. First download this zip and extract the two files inside in to your simonk directory. Now edit the “tgy.asm” […]

  • MultiWii 3D

    https://github.com/c—/MultiWii3D MultiWii simonk reverse motor test (for inverted flight) This is my technique for making 3D props: First I get two pieces of wood and a C-clamp.  Then I heat up one side of the prop with a heat gun set on low.  It actually doesn’t take that much heat.  I keep the gun about […]